Serving Sydney, Central Coast, Newcastle & Wollongong
Uncategorised
Safe Floors Australia Anti Slip Tile treatment – A unique treatment that microscopically enhances the tread pattern of the floor to Dramatically increase the slip resistance without altering the appearance. Suits most tiles including ceramic, quarry, terrazzo, marble, granite, porcelain or concrete/aggregate. This unique treatment is effective both Indoors and outdoors.
Benefits of Safe Floors Australia Anti Slip Tile Treatment:
- It is not a ‘coating’ – will drastically increase the slip resistance of tile surfaces without changing appearance.
- There is no ‘curing’ period – so floors can be returned to service immediately after completion of treatment.
- Undisruptive – No strong smells or loud noises during the process Most times this can be carried out in normal business hours
- Long Lasting treatment which can last up to 6 years before requiring a ‘top up’ treatment.
Why Choose Safe Floors Australia Anti Slip Tile Treatment?
Safe Floors Australia will ensure that our treatment achieves the required result in the location that the treatment is being applied, and we will always work with you to ensure that minimal disruption is caused throughout the application process.
Safe Floors Australia also use a British Wessex Pendulum when doing all tile treatment projects. This device is the industry standard piece of equipment used to measure slip resistance. Our pendulum is always calibrated at the required intervals, meaning that we can accurately test our work to ensure that your surface will comply with a 3rd party independent test or audit.
info coming soon
Call 1300 565 530 Enquire Online
Grade:
Medium 36 aluminum oxide grit
Solvent acrylic adhesive
Temperature range: -30º to +80ºC
Adhesion to steel (9/25.4mm2) 2000
Thickness: 0.8mm
Tensile strength 7
Adhesion 60Ogm/cm Elongation at break 80%
Application:
Applied where the surface is uneven. Ideal for installation on metal checker plate because the tape has a soft foil backing which takes up the profile of an uneven surface.
Durability:
Provides a tough and durable slip resistant surface.
When tested to ASTM C 1028-96 the test exceeded the required rating of 0.5 on wet surfaces.
Wet test 1.14 - Dry test 0.98
Will meet the AS/NZ standard slip test requirements.
Adhesion:
Applied to clean and dry surface between 12-35C degrees. Surface primer is available to aid adhesion.
Colours and Sizes:
All rolls are 18.3 metres in length
Black Yellow Black/Yellow
TCB50 50mm TCY50 50mm TCYB 50mm
TCB100 10Omm TCY100 100mm TCBY 100mm
TCB150 15Omm TCY150 150mm TCBY 150mm
For other sizes please contact Safe Floors.
Contact our experienced team today for a free quote
Carborundum Modified Safety Stair Treads and Plates are suitable for both internal and external applications and will continue to provide optimum safety in: severe marine environments, areas prone to water or oil spillage including immersion, over gra
dients for example pedestrian ramps and can even be manufactured to suit ladder rung.
As carborundum is well known as being the second hardest material to diamond, Carborundum Modified Safety Stair Treads and Plates are suitable for the most demanding applications.
Carborundum Modified Safety Stair treads and Plates are suitable for applications which demand the highest performance in pedestrian safety, including:
- Industrial: manufacturing plants, construction sites, conveyor walkways, on / off shore oil & gas production and refining, power stations
- Commercial: airlines and airports, fast food kitchens, delivery vehicles - -
- Marine Industry: wharves, port authorities, ferries
- Public Areas: public pools, railway stations, tram and bus stations, shopping centres, sporting stadiums, theatres, main roads departments
- Institutions: aged care facilities, hospitals
Available in the following backing materials:
Galvanized steel
Colour bond
Aluminum
Stainless steel
These have then been designed to provide optimum toughness, corrosion resistance, resistant to:
Acids
Alkalise
Solvents
Grease
Oil
Saltwater
Detergents
Other Hydraulic Fluids
Alcohol
Fire Retardant in the Cured State
Safety Plates are available in the following colours:
- Safety Yellow
- Black
- Brown
- Terracotta
- British Racing Green (Brunswick Green)
- Grey
- Red
The product surfaces are available in the following grades:
| Grade | ISO | Microns (Range) |
| Barefoot | 80 | 212 – 180 |
| Fine | 46 | 425 – 355 |
| Industrial | 24 | 850 – 710 |
| Heavy Duty | 20 | 1180 – 1000 |
| Offshore | 16 | 1400 – 1180 |
Durable & Cost Effective Industrial Stair Nosing
Call 1300 565 530 Enquire Online
The toughest, most durable and longest lasting stair nosing available anywhere in the world.
Safe Floors Australia’s industrial FRP anti-slip products are locally manufactured, by hand in a unique one step manufacturing process then trimmed and cut to size. By incorporating all of the separate elements of the finished product into one seamless fiberglass composite material we are able to build the strongest and most durable product available on today’s market. The general term for the way we make our product is Fibre Reinforced Plastic or FRP for short, or more commonly called fiberglass.
FRP doesn’t dent, corrode, rot, delaminate, support bacteria and has a high strength to weight ratio being several times higher than steel on a weight to weight basis. 
It demonstrates a very high resistance to UV and other environmental conditions is highly resistant to chemical attack and has an indefinite lifespan. The particular base resin used in Safe Floors nosing's also features extremely good fire retardant and low smoke emission characteristics.
Almost all other stair nosing and floor plate manufacturers adopt a layering or bonding method where an anti-slip coating is bonded to a pre-formed base such as steel or pultruded material. This method invariable sets up a weak point where the two dissimilar components, the top coating and the base material, meet. This weak point will be further strained by stress set up within the product through movement associated with normal use or t hrough thermal expansion and contraction. 
Such a bonding method also has a low tolerance to impact and typically the top coating will peel away from damaged or impacted areas.
The products you receive from Safe Floors are constructed from a base mix of fire retardant polyester resins interspersed with layers of immensely strong interwoven glass fibre. The colour pigmentation is floated right through the full thickness of the material so that it is impossible to wear the colour off and become unsightly.
The fused alumina anti-slip grain is then forced under pressure into the base mix while it is still wet, followed by a final resin layer laid over the top of it all. This entire composite mix is then cured at optimum temperatures until fully hard.
No layering, no bonding, no weak spots, just one immensely strong composite whole.
With Safe Floors FRP products, the anti-slip grit cannot be knocked out as happens with over-coating methods, no peel back or chipping can occur around localised damage points, the colour cannot be worn off, flexing and movement will have no effect on them and with the FRP material, there is a 100% guarantee that it cannot rust or corrode.
You simply get the toughest, most durable and longest lasting nosing’s available anywhere in the world.
Contact our experienced team today for a free quote
AVAILABLE COLOURS
INDUSTRIAL:STAIR NOSINGS
Industrial Stair Nosing’s are available in two ‘in stock’ or standard colours, SAFETY YELLOW and BLACK
Additionally four other colours are available ‘on request’, RED, WHITE, GREEN and BLUE.
Glow in the dark stair nosing’s are available that look off white to green in daylight and glow bright green/yellow in darkness.
Safe Floors provide a range of standard or ‘in stock’ length Industrial Nosing’s from 450mm (18”) to 1200mm (48”) to accommodate almost all widths of steps. Other sizes up to a length of 3.6m (11’8”) can be ordered. STAIR NOSINGS are offered in two series of tread depth 75mm and 150mm depth. Return: The return on all Industrial Stair Nosing’s is standard at 25mm. This nosing return has three key functions
a) It adds substantial rigidity to the stair nosing.
b) When ascending the steps the drop offers good step edge definition.
c) It allows the anti-slip texture to extend right to the very edge of the stair nosing offering maximum grip.
INDUSTRIAL WALKWAY COVERS
PRODUCT SCHEDULE
WALKWAY COVERS are offered in flat sheets in varying standard sizes measured in two dimensions, length and width.
The thickness of WALKWAY COVERS will vary dependent upon the grit texture specified, the coarser the grit - the thicker the cover, and will range between 4mm and 7mm
LADDER RUNG COVERS
PRODUCT SCHEDULE
LADDER RUNG COVERS are available in SQUARE or "U" section in a series of standard lengths and widths.
