StepRight® Entrance Matting

Grip Guard StepRight® Entrance Matting is constructed  from anodised heavy duty aluminium treads to provide  an attractive, safe, non slip and easily maintained barrier  between internal and external building conditions.

Other colours available on request

•    Unique construction integrates strong, heavy duty treads
of aluminium and flexible rubber cushioning ribs to ensure StepRight® Matting contours to the substrate to reduce impact noise.
•    StepRight® Matting will not dome and cause annoying drumming
•    Available with alternate inserts of either rubber, carpet or a  combination of the two
•    StepRight® is UV stabilized, does not fray, is stain resistant and appropriate for both wet and dry applications
•    StepRight® Entrance matting is not affected by moisture
•    Available in standard lengths for architectural specification or made to measure for existing recessed areas.

Designed to meet all aspects of the Australian and New Zealand Standards AS/NZS 1428 part 4
Complies with all aspects of the Building Code of Australia.

Wheel Stops & Speed Humps

 Wheel stops are an essential component of any well-maintained car park- whether inside or outside. They help to keep vehicles in order by preventing them from moving too far into a space.
They also prevent damage by keeping vehicles and walls separated.
Traditionally, wheel stops have been manufactured from concrete.
 While meeting their basic purpose,these barriers are very heavy, requiring lifting equipment for installation and maintenance.
They also tend to blend in with the car park surface making them hard to see, which increases the risk of damage to both vehicles and the barriers themselves.

Grip Guard wheel stops are a rubber alternative to the concrete version.

Our wheel stops are a rubber alternative to the concrete version.

FEATURES INCLUDE:

• lightweight: at 14kg each, these wheel stops can easily be installed by a single person.
• high visibility: safety yellow reflective strips make the wheel stops stand out.
• dimensions which comply with the AS/NZ 2890.1 standard.

WHEEL STOPS ARE TYPICALLY USED TO:

• limit kerb overhang which is inconvenient or hazardous for pedestrians.
• inhibit contact with an end barrier or high kerb.
• inhibit encroachment into an opposing parking space.

IN ACCORDANCE WITH AS2890 WHEEL STOPS ARE:

• between 90 and 100 mm in height, and 1650 ±50 mm in width.

PolyStud®

Discrete architectural plastic Tactile indicators

Grip Guard PolyStud®, discrete architectural plastic Tactile indicators are
 designed for installation in aesthetically sensitive applications or where
exotic substrates are used such as polished timber, marble, granite,
 and the like. PolyStud® is engineered and purpose built tough to
withstand extreme point loading and side impact.

Other colours available on request

•    R11 anti-slip rating makes PolyStud® one of the best performing plastic Tactile indicators on the market
•    Large anchoring spigot to ensure maximum holding strength, 8mm diameter x 20mm long
•    Manufactured from a blend of new generation polymers to ensure long lasting UV stable performance
•    New patented DIY Drill&Lock® Technology, no adhesive required
•    Simple interlocking template installation.




Designed to meet all aspects of the Australian and New Zealand Standards AS/NZS 1428 part 4
Complies with all aspects of the Building Code of Australia.

PolyPad®

Retrofit – Polymeric Tactile

New, unique 600 x 900mm format makes Grip Guard PolyPad® Tactile seamless.
 They are designed to retrofit over almost any substrate and provide  installers and building owners with the most simple and effective installation system.
Less joins also ensures less dirt ingress and reduces the possibility  of failure.

•    Manufactured from flexible polymeric materials and will contour to any substrate
•    Dimensionally stable, will not move once bonded to concrete, bitumen, timber, pavers & most other substrates
•    New unique 600x900mm format making installation extremely easy
•    Less joins making moisture ingress & product failure less likely
•    Designed & tested in Australia to withstand extreme climatic conditions
•    Manufactured from a unique blend of premium polymeric materials and will not craze, discolour or bloom.

















Designed to meet all aspects of the Australian and New Zealand Standards AS/NZS
1428 part 4 Complies with all aspects of the Building Code of Australia.